Dear Listers,
I am looking at relining my Brake Shoe Material to something a little softer
/ with a bit more bite! I just don't believe that I can ever get enough heat
into the shoes during normal use to enable a 'race' type material to
perform. It's just overkill and is leading to 'only adequate' braking
performance. However, I need to select a material that is not too aggressive
on my Alfin Style Brake Drums. Something that is suitable for street use
would be preferable. I have 4 Spot Calipers with cross drilled and slotted
rotors up front, so this end of the car works fine. So, I believe I just
need to find that right balance using a different shoe lining material.
Therefore I ask the question of those running TR4's with NO brake booster,
STD diameter/width drums and STD slave Cylinders. What Brand / Grade of
Lining Material are you using on the Shoes?
Any input will be gratefully accepted.
Thanks all.
Kind Regards
Peter Vucinic
TR-4
_____________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|