Bob
I know your on the right track lowering your set-up and I agree with
Jack Wheelers suggestion on front to rear height. I also cut down comp.
springs for the front and I used 10" 2 1/2 coil over springs with spacers
to adjust for the height on the rear. I used that set-up for two seasons.
Last winter I cut ALL that stuff off and installed coil overs all
the way around. It's a simple task and now I can set any ride height, with
any corner weight in between runs.
MY question for the group is : Has anyone made (or found) a captured
spherical bearing to be used in place of a bushing on the rear swing arm?
(TR-6) I have found such bearing / bushings for 911 Porsches. But not in the
correct size that I Think I need.
David W.
|