It doesn't take too much to make one either. Friends with both the
eared and hex nuts have done this...
Three eared:
thick wall tubing notched to fit on one end, then welded to a piece of
steel plate appropriately shaped to hammer on.
Hex:
Thick wall hex stock or buy a big socket and weld to the lever arm.
Rod
Subject: Re: panasport wheel problem
Author: cak@dimebank.com (Chris Kantarjiev) at CCGATE
Date: 3/12/98 9:09 AM
There are two different tools, at least, on the market for avoiding
the hammer. I have a fairly expensive one that includes a torque
wrench fitting, from the Stainless Steel Brake company. There's
a less expensive one that is just a fold up arm with a welded
bracket that fits over the knockoff ears, too.
|