Jimttx wrote:
> I am stripping the block so it can be cleaned. Is there an easy way to remove
> the freeze plugs?
Hi Jim,
I used to use a screwdriver hammered through the center and popped out.
Now I drill a hole in the middle, insert a threaded end on a slide
hammer which works more cleanly.
--
Glenn Merrell
TSN Admin
http://www.triumphstag.net
mailto:StagByTriumph@triumphstagclub.org
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Buick-rover-v8@autox.team.net
http://autox.team.net/mailman/listinfo/buick-rover-v8
http://www.team.net/archive
|