Dave Herr wrote:
> Alright, you guys saved me on the bell housing now how about helping me with
> the rest of the missing items. I need a starter, prefereably a small one to
> clear the exhaust. I have plenty of room from the frame clearance, but if the
> starter is short, this will give more header clearance. I have been told that
> the GM V6 is the same as the 215 with two cylinders cut off. Does this mean
> that a V6 starter would work. Also, my engine is a Rover 3500S block and a
> Buick flywheel. I found a mini starter on ebay for a buick 3.8, any ideas?
No, Dave. The only V6 starters that work are for '62-63 Buick odd-fire. There
are aftermarket gear reduction starters from many of the MGB-V8 and TR8 folks.
The Range Rover Lucas Marelli gear reduction starter will bolt to the block, but
I don't know if it will mesh with your flywheel.
Kent K.
///
/// buick-rover-v8@autox.team.net mailing list
///
|