RE:XJ6 rack bushings.

[Greg Meboe <MEBOE@WSUVM1.CSC.WSU.EDU>]

XJ-6 rack bushings are not too hard to replace.  There are three metalastic
bushings, and four rubber-steel washers.  The BL part numbers are
C.29406 and I forget the other one.  Quite a common failure, and the parts
should run you under 25$.
     Hope this helps.

       Greg Meboe  MEBOE@wsuvm1.csc.wsu.edu
       Dept. of Mechanical and Materials Engineering
       Washington State University.