If you are worried about how long they last, the rubber motor mounts on my cars
have usually been good for 30-40 years.
Scott
-----Original Message-----
From: bricklin0095@aol.com
To: Bricklin@autox.team.net
Sent: Fri, 10 Apr 2009 5:29 pm
Subject: [Bricklin] rubber vs poly.
Johns right, the poly bushings have a tendency to squeak/groan loudly at
times.. I tried them on the front sway bar and found that cutting an antifreeze
jug and wrapping the plastic around the bar before sliding the bushing on was
the only way to permanently quiet it..?
?
One thing that I reccomend for any one replacing the motor mounts on the 74's
is to drill a hole through the mount and install a 3/8 bolt. this will keep the
mount from separating at the rubber while allowing the rubber to ablsorb the
vibations.?
_______________________________________________?
Support Team.Net http://www.team.net/donate.html?
?
Bricklin@autox.team.net?
http://autox.team.net/mailman/listinfo/bricklin?
?
You are subscribed as isensee@aol.com?
?
http://www.team.net/archive?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|