propane torch on the metal door, it will soften the fiberglass right up and
come off easy with a putty knife. yes it will hurt the pain, but if you have
fiberglass there the paint has to be redone anywho.
On 7/25/2008 11:29:05 AM, Greg Schroeder (gschroeder@comcast.net) wrote:
I originally thought they had used bondo, but it appears to be
> more
> like fiberglass. There is a lot of this still on the door. I spoke with
> a
> local sandblaster and he said that sand would not remove the fiberglass.
> Does
> anyone know a good method to remove fiberglass from metal other than
> sanding?
|