Randy,
I wanted to put a nicer leather seat in my car, but the ones I was looking
at were all too wide. I finally settled on the seats from an early C-4
Corvette (mid- to late 80s). One reason that these work well is that the
release to fold the seat forward is on the back of the headrest and not on
down by the pivot point where there is very little room due to the high door
sills.
Hope this helps,
Rod
#0445
///
/// bricklin@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|