-----Original Message-----
From: PgrMstr@aol.com <PgrMstr@aol.com>
>OK...any recommended camber settings for a stock GSR sedan (1997)? Factory
>spec or as much negative as it'll go? Is there much of a difference and
will
>it be effective?
The question is: how much negative camber *can* you get? Camber angle on
late-model Honda suspensions isn't adjustable, except as a collateral effect
of changing other settings. Try setting the front toe a little out (spec is
zero) -- that will help a bit, and kept reasonable, shouldn't screw up tire
wear.
Jamie
'92 Prelude Si
Speed Demon Racing
http://www.mindspring.com/~jsculerati/sdr
|