Paul wrote,
>Same here, the PO had used Stag jointing paste (the pink stuff they use on
>core plugs) to install the rear seal. The only way it came out was to
remove
>the extension housing and drive out the seal from the inside. grrrrr.
>
>It's worth trying Jarrid's method first. Just don't be too upset if it
>doesn't work.
>Cheers,
I'll tell ya guys, if you treat the seal as an expendable part and split
the seal from an "O" into a "C" it is sooooo much easier to remove.
There is no extra credit for getting the seal out in one piece.
Cheers,
Jarrid
|