6pack
[Top] [All Lists]

Re: [6pack] Dreaded Thrust Washers in the Oil Pan

To: Bob Danielson <75tr6@tr6.danielsonfamily.org>
Subject: Re: [6pack] Dreaded Thrust Washers in the Oil Pan
From: Glenn Franco <gaf3@charter.net>
Date: Fri, 07 May 2010 08:23:18 -0400
Thanks Bob
I was not aware of Scot Helms work on these thrust washers. Just visited 
his site.
Looks like a good alternative to the stock arrangement.

What surprised me is that this engine only has about 40k miles on it.

I also like the idea of a full circle thrust washer that Geoff Bryne has 
recommended.

 I need to inspect the area on the block and cap more closely.

Glenn

Bob Danielson wrote:
> Did you order from Scott Helms (http://www.customthrustwashers.com/) 
> Most of the 6-Pack Forum guys have moved to Scott's solid alloy thrust 
> washers. Even if you don't buy from him, his site is an excellent 
> resource on all things "thrust washer"
>
> Bob
>
> Bob Danielson
> 1975 TR6 CF38503U
> Running w/ Throttle Body Injection,
> Toyota 5 speed & Nissan LSD
> http://tr6.danielsonfamily.org
> --------------------------------------------------
> From: "Glenn Franco" <gaf3@charter.net>
> Sent: Thursday, May 06, 2010 5:13 PM
> To: "Friends of Triumph" <fot@autox.team.net>; <6pack@autox.team.net>
> Subject: [6pack] Dreaded Thrust Washers in the Oil Pan
>
>> Group
>> I've been working on a friends 74 TR6 and we discovered lots of crank 
>> end play.
>> I checked the end play because he was complaining of hard shifts or 
>> grinding while putting the trans in reverse.
>> I removed the pan and found the thrust washers in the oil pan..
>> I've run into large end play issues with the TR6's but this is the 
>> first I've seen in the pan.
>>
>> Understanding that this is a common malady with the TR6, I ordered a 
>> few sets of oversize thrust washers.
>> Don't think there is enough material in a .025" oversize bearing to 
>> fix the problem.
>>
>> I pulled the bearing cap and didn't see major wear in the thrust face 
>> of the crank. I will need to do a closer inspection of the block
>>
>> Anyone out there seen a reasonable/simple fix for this problem?
>>
>> Thanks in advance
>> Glenn Franco
>> TR6's, 250 and Spit racer
>> _______________________________________________
>>
>> 6pack@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/6pack/75tr6@tr6.danielsonfamily.org 
_______________________________________________

6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>