I haven't had that problem, but you should be able to turn the choke knob
and lock it in place.
But, if it happened, at least it prevents you from running around all day
with the choke on.
Al :)
----- Original Message -----
From: "Lee Daniels" <lee@automate-it.com>
To: "6 Pack" <6pack@autox.team.net>
Sent: Tuesday, March 02, 2010 12:02 AM
Subject: Re: [6pack] CHOKE CABLE
>> I put return springs on the later carbs also so to
>> make the solid cable work easier.
>
> I had this setup for a while, but eventually the springs overcome the
> friction
> holding the choke in position. Then I could no longer set the choke - the
> springs would return the choke to off. So I removed the springs and now
> all is
> well. The solid cables do a good job of both pushing and pulling, just
> like
> the solid cables in areas like your heat/vent flaps, etc.
>
> - Lee
> _______________________________________________
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|