Jim,
Hope you get this before that bench test! The negative cable clips onto one
of the starter mounting ears to ground the case of the starter. You are
correct about how to engage it. Hang onto it or it will jump right off the
bench.
Rick
http://topshamautoparts.com/tr6/
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of jim hearn
> Sent: Saturday, November 04, 2006 6:03 PM
> To: triumphs@autox.team.net
> Subject: [TR] Question about a starter bench test
>
>
> Just need to refresh my memory. Isn't the starter bench test done by
> attaching a battery negative to the lower post on the solenoid and battery
> positive to the top post and then using a screw driver, bridge
> from the side
> lead to the positive top post when the starter will engage and turn?
> Thanks, Jim
|