Ignition Lock

["Tomislav Marincic" <tomislav.marincic@earthlink.net>]

"The bolts are metric, by the way."

Are you sure? My 71 TR6 ignition lock had a 5/16x3/4"" coarse thread shear bolt 
set holding it in place. The later TR6's used a different ignition switch, 
though the lock portion was the same. The REPLACEMENT lock I got from TRF had 
an 8mm/1.25 pitchx30mm shear bolt set included. (I just did this stuff last 
week)



http://www.triumphowners.com/735