Kendall Larsen wrote:
> Hi Ron,
>
> I have to say that based on my own personal experience that Apple Hydralics is
> a NO GO on the Brake MC rebuild for a TR-6 -- I wanted them to brass sleeve it
> and they said they couldn't because of the "stepped-bore" on the inside. I'd
> say just get a new one or go to a place that actually will put in a same
> diameter sleeve.
>
> That said I did have my brake MC honed at a local shop and then I put in some
> new seals. I didn't expect it to last much more than 3-4 months. But it is
> still leak free a year later (not driven too much) So YMMV.
>
> Kendall
> San Clemente, CA
>
>
>
>
>>Now to the questions. Has anyone used Apple Hydraulic for a rebuild??
>>If so how did they do? Are there others out there that rebuild master
>>cylinders and biisters? Would you risk a used servo and master cylinder
>>off Ebay? If you do a rebuild does one get the brass sleeves or go with
>>the over sized holes and pistons?
>
www.brakecylinder.com does the steped bore brass resleeve for $110.00. No more
pits. Beats buying a
new one in my opinion.
Don Malling
|