BINGO!!
Right on Vance ... when the engine started the pedal didn't ...
absolutely no movement ... ahh well now at least I know how to
change the booster, really only a 10 minute job ... as soon as I
get another one, that hopefully works >:-o
> Bill:
>
> With the engine off, pump the brakes a few times to bleed off
>residual vacuum. Then depress and hold the brake pedal with light to
>moderate pressure. Start the engine. The pedal should immediately move
>down a very noticeable amount as the vacuum boost engages. If it doesn't
>move, or barely moves, the booster is bad.
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
|