Removing Trunnions

["John North" <jnorth@novagate.com>]

Is there a trick to removing these?   I have the pin and nut off and the
pressure off with a jack under the spring plate, but the bolt is really
stuck.   I can hardly turn it with a socket and a 24" bar, let alone back it
out.   Is it threaded in the lower a-arm?   Can I put the nut on it and
whack it with a BFH?   It is not binding in the vertical link, because I can
move that back and forth at least a half inch (and which is why I have to
get this thing out.).



Any help appreciated.



John North

76 TR6