Continuing the on-going clean out of stuff I'll never use. Have a new TR6
camshaft, which is a custom grind. This is not a regrind of an old cam, but
one made from a new billet.
Specs:
Lobe Separation: 110 degrees
Duration: 262 degrees
Duration @ .050 lift: 202 degrees
Camshaft lift: .268"
Valve lift: .389" (w/ 1.45 ratio rockers, ie stock)
Price: $180 (+ about $10 shipping)
This camshaft is similar to the Triumph Tune Fast Road, or Richard Goods GP3
cam... so it will give increased performance throughout the band without a
lumpy idle or anything. Comes with the spec sheet so you can set it up, and
a little installation booklet.
Location: Bristol, PA USA
Contact: 215.269.3344 or email kmr@pil.net
Payment: Check or Money Order
Cheers,
Kai
|