When I had a similar problem, it turned out to be little particles of
debris in the master cylinder. The finish of the bore and the seals all
looked fine. After I flushed it out, everything was back to normal -- for
a week.
At 03:24 PM 9/25/00, RedTriumphTr6@aol.com wrote:
>I thought that I should add that the brake fade is not as noticable today, as
>the fading seems to occur now (with temps back up to 55) less often; i.e.,
>about two or three times during the day (going to and from work this morning
>when it faded, and then a 60 mile highway trip where it did not fade at all,
>even in city driving at my destination)). One pump on the brake after the
>fade to the floor always has restored normal braking. Thoughts?
> Bob Pierson
---
Ted Stevens
stevens@erols.com
|