- 1. oversized carb shafts (score: 1)
- Author: Unknown
- Date: Sun, 10 Feb 2002 08:24:14 -0600
- Does anyone know of a source for oversized cab shafts for SU carbs? And is this a job that can be done with home shop tools? Larry Zink /// triumphs@autox.team.net mailing list /// To unsubscribe sen
- /html/triumphs/2002-02/msg00431.html (6,969 bytes)
- 2. RE: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Sun, 10 Feb 2002 09:41:35 -0800
- Moss has them, so any Moss distributor will (like BPNW or Power British), most likely TRF does too. You will need the special piloted reamer, also available from Moss. I believe that's all. Be sure
- /html/triumphs/2002-02/msg00450.html (7,824 bytes)
- 3. Re: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Sun, 10 Feb 2002 15:29:42 -0700
- YOu can get them from Moss or VB, but DON'T! Instead, drill out and rebush the holes for a standard shaft, The larger diameter shaft will interfere with proper air flow and hurt your performance. Th
- /html/triumphs/2002-02/msg00462.html (7,772 bytes)
- 4. re:oversized carb shafts (score: 1)
- Author: Unknown
- Date: Sun, 10 Feb 2002 21:16:11 -0500
- Larry, why do you want oversized shafts? When I rebuilt mine, I reamed out the old bushes and gently presed in new ones. Perfect stock size now. Talk to Brian Schlorff about this He can tell you wher
- /html/triumphs/2002-02/msg00469.html (6,974 bytes)
- 5. RE: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Sun, 10 Feb 2002 21:19:53 -0500
- I'm surprised. I was under the impression that the holes had to be align-bored. Can you give information about how to do this and where to get the reamer? Don't have a contact for Brian Schlorff. -
- /html/triumphs/2002-02/msg00470.html (7,279 bytes)
- 6. RE: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Mon, 11 Feb 2002 08:07:07 -0500
- Message text written by INTERNET:hfader@usa.net align-bored. Can you give information about how to do this and where to get the reamer? Don't have a contact for Brian Schlorff.< Yes they are align bo
- /html/triumphs/2002-02/msg00484.html (7,769 bytes)
- 7. Re: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Mon, 11 Feb 2002 08:57:20 -0500
- . Tony Rhodes wrote ::: the outside-in on one bore, then press in the the reamer and do the other side. == This is not quite so, you only ream to the exact depth of the bushing and "STOP", do not und
- /html/triumphs/2002-02/msg00488.html (7,974 bytes)
- 8. Re: oversized carb shafts (score: 1)
- Author: Unknown
- Date: Mon, 11 Feb 2002 19:05:54 -0500
- Message text written by "Fred Thomas" "STOP", do not under any circumstance ream/drill all the way through, someting has to hold the busing inside in place and that is the carb body, this is not as e
- /html/triumphs/2002-02/msg00542.html (7,573 bytes)
This search system is powered by
Namazu