- 1. [Shop-talk] crown molding (score: 1)
- Author: "john niolon" <jniolon@bham.rr.com>
- Date: Fri, 10 Aug 2007 20:33:01 -0500
- here's a question for you wood working guys. I'm thinking of putting crown molding in a couple of rooms. one is the living room 18'x12' with 8' ceilings. Is there a proportional ratio between the cei
- /html/shop-talk/2007-08/msg00013.html (7,481 bytes)
- 2. Re: [Shop-talk] crown molding (score: 1)
- Author: ejrussell@mebtel.net
- Date: Fri, 10 Aug 2007 14:23:37 -1200
- What ever looks good to your eye. Cut the moulding upside down - i.e. place it in your mitre saw such that the top of the moulding in on the table of the saw (horizontal surface) and the wall edge i
- /html/shop-talk/2007-08/msg00014.html (7,436 bytes)
- 3. Re: [Shop-talk] crown molding (score: 1)
- Author: Pat Horne <roadsters@hornesystemstx.com>
- Date: Sun, 12 Aug 2007 09:12:33 -0500
- Eric is correct, cut the crown upside down and things will be much easier. Corners of walls, whether inside or outside corners are rarely square, so use some scrap pieces of crown to mock up the cor
- /html/shop-talk/2007-08/msg00019.html (8,996 bytes)
- 4. Re: [Shop-talk] crown molding (score: 1)
- Author: Berry Kercheval <berry@kerch.com>
- Date: Tue, 14 Aug 2007 06:38:23 -0700
- One thing you can do is cut away part of the molding *behind* the coped cut, making the coped end of the moding "sharp". That way, if the cut is a bit off when you try to fit it, it's simple to adjus
- /html/shop-talk/2007-08/msg00021.html (6,901 bytes)
This search system is powered by
Namazu