- 1. aluminum head for mgb (score: 1)
- Author: "Ted Stowe" <cessna@speakeasy.org>
- Date: Tue, 28 Mar 2000 09:16:14 -0800
- question for the group. what is the consensious on the crossflow head or the replacment aluminum head, (standard design) for a '77 mgb. I am under the impression that neither head would precisely mat
- /html/mgs/2000-03/msg01503.html (7,382 bytes)
- 2. Re: aluminum head for mgb (score: 1)
- Author: "Andrew B. Lundgren" <Lundgren@iname.com>
- Date: Tue, 28 Mar 2000 10:30:18 -0700 (MST)
- I put on a standard replacement AL head in Jan. Works great. I have an 18GD. I took it in and had heli-coils installed in the maniford stud holes, spark plug holes, and the rocker arm assembly holes.
- /html/mgs/2000-03/msg01504.html (8,693 bytes)
- 3. Re: aluminum head for mgb (score: 1)
- Author: "Andrew B. Lundgren" <Lundgren@iname.com>
- Date: Tue, 28 Mar 2000 12:08:57 -0700 (MST)
- My head did not require the heli-coils. I put those in as preventive maint. They only cost me about $75 and now I don't have to worry about the soft AL. The holes would have worked great, but I didn'
- /html/mgs/2000-03/msg01505.html (11,686 bytes)
- 4. RE: aluminum head for mgb (score: 1)
- Author: Joe Short <buster_balz@operamail.com>
- Date: Tue, 28 Mar 2000 14:21:07 -0500
- I've been curious about these heads too. The catalogs all show them with the small intake valves. Can they be modified to accept the 1.625" intake valves ? They only cost me about $75 and now I don't
- /html/mgs/2000-03/msg01506.html (12,444 bytes)
- 5. Re: aluminum head for mgb (score: 1)
- Author: Steve Darby <elan@efortress.com>
- Date: Tue, 28 Mar 2000 12:29:28 -0700
- I am Steve Darby, one of the original redesignors of the MS(Steve)X crossflow head. Email me a list of specific questions and I will answer them to the best of my ability. I also sell the stock confi
- /html/mgs/2000-03/msg01507.html (7,817 bytes)
- 6. Re: aluminum head for mgb (score: 1)
- Author: Max Heim <mvheim@studiolimage.com>
- Date: Tue, 28 Mar 2000 11:37:23 -0800
- Just a suggestion -- run the sling diagonally from a front motor mount on one side to a bell housing bolt on the other side. The chain might scrape a little paint on the block but I've done it that w
- /html/mgs/2000-03/msg01508.html (7,322 bytes)
- 7. Re: aluminum head for mgb (score: 1)
- Author: "Andrew B. Lundgren" <Lundgren@iname.com>
- Date: Tue, 28 Mar 2000 12:46:05 -0700 (MST)
- Thanks! That sounds like it will work great. (On my block it will have to scrape the grime before it gets to the paint! :)
- /html/mgs/2000-03/msg01509.html (7,725 bytes)
This search system is powered by
Namazu