- 1. PA front suspension issues (score: 1)
- Author: DSBonar@aol.com
- Date: Wed, 5 Jun 2002 19:18:45 EDT
- In starting to bolt up the front suspension, I find the Road spring front mounting pin seems too short. The pin is 3.14" from the base of the nut to the cone shaped end. Moss pictures indicate there
- /html/mg-mmm/2002-06/msg00003.html (8,220 bytes)
- 2. Re: PA front suspension issues (score: 1)
- Author: "tom metcalf" <mgtom@bright.net>
- Date: Wed, 5 Jun 2002 21:16:25 -0400
- I don't have the parts in front of me but yours all sound reasonable size. You do have the spring eye fully tucked up into the front knuckle, right? The knuckle isn't over 3" wide - actually visuali
- /html/mg-mmm/2002-06/msg00004.html (10,269 bytes)
- 3. RE: PA front suspension issues (score: 1)
- Author: "Robert Grunau" <cgrunau@pathcom.com>
- Date: Wed, 5 Jun 2002 21:31:16 -0300
- Don and Tom, I'll bet the cross tube threads are stripped for the first 3/4' or so and the pin threads will not reach good threads. Remove the cross tube and check the tapped threads in the ends. Eve
- /html/mg-mmm/2002-06/msg00005.html (10,335 bytes)
- 4. Re: PA front suspension issues (score: 1)
- Author: "tom metcalf" <mgtom@bright.net>
- Date: Wed, 5 Jun 2002 23:01:30 -0400
- Don & Bob, While I haven't seen these get stripped before - you're right, Bob, it could happen. All is the same as TC and I nearly ALWAYS replace the front cross tube with new as it's a very importan
- /html/mg-mmm/2002-06/msg00006.html (11,955 bytes)
- 5. RE: PA front suspension issues (score: 1)
- Author: "Lew Palmer" <lpalmer@roundaboutmanor.com>
- Date: Wed, 5 Jun 2002 22:08:31 -0500
- Tom et al, I called Don this evening and worked through his problem. It turns out that the threaded inserts into the front cross-tube had been pushed back into the cross-tube quite a way (probably an
- /html/mg-mmm/2002-06/msg00007.html (12,202 bytes)
This search system is powered by
Namazu