Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+steering\s+idler\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+steering\s+idler\s*$/: 7 ]

Total 7 documents matching your query.

1. [Healeys] steering idler (score: 1): Author: "mail.maineguide.com" <info@atteanlodge.com>; Date: Thu, 7 Feb 2008 11:06:26 -0500; Amongst many other projects, I decided to rebuild the steering idler on my BJ8. Ordered new seals and bushings from Moss, got the old bushings out,lubed and pressed new ones in, identical to the old; /html/healeys/2008-02/msg00149.html (6,667 bytes)
2. Re: [Healeys] steering idler (score: 1): Author: William Berg <williamsantiks@hotmail.com>; Date: Thu, 7 Feb 2008 08:34:00 -0800; Pretty sure you are going to have it honed and fit by a machinist. When I did my BN1, I had the same problem -William Berg _________________________________________________________________ Shed those; /html/healeys/2008-02/msg00150.html (7,230 bytes)
3. Re: [Healeys] steering idler (score: 1): Author: Warthodson@aol.com; Date: Thu, 7 Feb 2008 12:34:03 EST; The bushing must be reamed to fit the idler shaft. You should have a machine shop do this for accurate fitting. Gary Hodson In a message dated 2/7/2008 10:06:50 A.M. Central Standard Time, info@attea; /html/healeys/2008-02/msg00153.html (7,983 bytes)
4. Re: [Healeys] steering idler (score: 1): Author: <pennell@cox.net>; Date: Thu, 7 Feb 2008 20:54:52 -0500; As others have said honing is necessary. However, I had the same prob many years ago in rebuilding an idler. As with yours it almost fit. It was very, very close. Some persistent sanding of the bore; /html/healeys/2008-02/msg00161.html (8,445 bytes)
5. Re: [Healeys] steering idler (score: 1): Author: "Alan Seigrist" <healey.nut@gmail.com>; Date: Fri, 8 Feb 2008 10:22:38 +0800; You could also use a brake honing kit if you have it, that should fit in there. Sears sells them, and probably Napa too. But reaming by a machine shop is the best idea. Alan ________________________; /html/healeys/2008-02/msg00162.html (7,746 bytes)
6. [Healeys] STEERING IDLER (score: 1): Author: "Jim Lyons" <jlyons4@rochester.rr.com>; Date: Fri, 15 Aug 2008 12:21:47 -0400; My mechanic has found some play in the steering idler on my 1966 BJ8. I am wondering what the list would recommend ? Rebuild with new bearings or replace with a new assembly. Also, who might be the t; /html/healeys/2008-08/msg00339.html (6,896 bytes)
7. Re: [Healeys] STEERING IDLER (score: 1): Author: "Dan Stromquist" <dan@warner-associates.com>; Date: Fri, 15 Aug 2008 13:25:24 -0500; You can buy the bushings and have that rebushed by a local shop. Follow the instructions to complete the job in an AH 3000 repair manual. Dan --Original Message-- From: healeys-bounces+dan=warner-as; /html/healeys/2008-08/msg00343.html (7,725 bytes)

Current List: 1 - 7
Page: [1]