Hi all: Got a new non-smog distributor and Pertronix ignition in my '69 2000. Didn't really notice a big performance increase, but it starts and idles WAY better. However, the Pertronix install instr
Hook up the vacuum advance line. Better economy & engine response as partial throttle. I found a rubber tube that would slip over the threaded nipple. Vacuum line slips inside the larger line over th
Hi kyle, My 1600 has tube half way and hose on that hookes to the bottom of the aft carb. I have pictures of that and the pertonics mounting if you would like me to send them Ron Edgar 68 1600 Ft Lau
snip Thanks for the help, Tom! I will hook that vacuum back up at lunch time... other questions remain unanswered, though, regarding the gap (should be .030, currently is about .010, not adjustable w
The Pertronix is not fussy about gap as long as you do not touch the magnets with the hall effect transistor unit. If there is slop on the dist shaft, then you need sufficient clearance to accomodate