- 1. Funky bolt size (score: 1)
- Author: Joe Rubio <joe@venuesports.com>
- Date: Thu, 26 Sep 2002 14:10:28 -0700
- I have a 2000 engine about ready to roll. The thing is, it doesn't have the smog equipment and I need 11mm bolts w/ 1.5 threads to block up the holes where the smog used to attach. Any ideas where I
- /html/datsun-roadsters/2002-09/msg00897.html (7,391 bytes)
- 2. Re: Funky bolt size (score: 1)
- Author: dana nojima <noji-1@pacbell.net>
- Date: Thu, 26 Sep 2002 14:31:44 -0700
- If you just plug the hole you will get a chirping sound. Tom W. had made custom plugs for this problem. Others have used a cap to cover the plug. I got a set from the folks in Modesto years ago. Dan
- /html/datsun-roadsters/2002-09/msg00899.html (8,115 bytes)
- 3. Re: Funky bolt size (score: 1)
- Author: "Gary K. McCormick" <svgkm@halley.ca.essd.northgrum.com>
- Date: Thu, 26 Sep 2002 14:46:58 -0700
- I did some looking, Joe, and there's no such a thing as M11 series threads; that is a thread with a basic diameter of 11mm, which is what I'm thinking that you mean - at least according to my copy o
- /html/datsun-roadsters/2002-09/msg00901.html (8,332 bytes)
- 4. Fw: Funky bolt size (score: 1)
- Author: "Andy Cost" <andycost@att.net>
- Date: Thu, 26 Sep 2002 17:14:31 -0500
- Aren't those plugs sized in national pipe thread? I thought you could pick up the right size plug at any hardware store. I've also seen where people have crimped the tubes shut and used the original
- /html/datsun-roadsters/2002-09/msg00906.html (7,212 bytes)
- 5. Re: Funky bolt size (score: 1)
- Author: "reblues" <reblues@reblues.net>
- Date: Thu, 26 Sep 2002 18:13:34 -0400
- It has been a while since I did mine, but I found a brass plug/cap at the local hardware store. I also picked up a clevis pin the right diameter to fit in the small part of the hole. I cut the lengt
- /html/datsun-roadsters/2002-09/msg00909.html (8,633 bytes)
- 6. Re: Funky bolt size (score: 1)
- Author: "Tom Phelan" <tomph@mchsi.com>
- Date: Thu, 26 Sep 2002 18:49:21 -0400
- If all you need is the cable, try a bike shop. I made mine from a rear brake cable from a mountian bike. The cable to the carbs is one long cable that is folded back in the choke control assembly in
- /html/datsun-roadsters/2002-09/msg00916.html (7,506 bytes)
- 7. Re: Funky bolt size (score: 1)
- Author: "datsunmike" <datsunmike@nyc.rr.com>
- Date: Thu, 26 Sep 2002 19:21:25 -0400
- to quote Tom: The plugs are made from 6061-T6 aluminum with 14mm x 1.5mm threading. Ends have a double step to fill the air injection hole to prevent the "bird chirp" sound effects. So you have the a
- /html/datsun-roadsters/2002-09/msg00919.html (9,454 bytes)
- 8. Re: Funky bolt size (score: 1)
- Author: "datsunmike" <datsunmike@nyc.rr.com>
- Date: Thu, 26 Sep 2002 19:27:11 -0400
- One parts car I bought had the original smog fittings brazed up after cutting the pipe flush to the hex head and it was quite well done. Mike pick /// datsun-roadsters@autox.team.net mailing list ///
- /html/datsun-roadsters/2002-09/msg00921.html (8,156 bytes)
This search system is powered by
Namazu