The issue is definitely offset. For example, I run 205/60-14 RE-71s (which has a fairly "square" contact patch to sidewall profile) on 14x7 American wheels with no fender roll, and don't get any rub
Victor, why the brand split between sump and crashbox/diff? Inquiring minds want to know... Earlier in its life (in North Texas, when it was a daily commuting vehicle), my U20 ran Castrol GTX 20W50.
Twenty years ago in Texas (think 100 degree summer days), after removing the unused manifold water jacket and fuel return hoses, I chose to re-route the fuel line in front of the radiator, tucked int
Anyone have three functional soft top/tonneau hold-down "posties" they can part with, for a '68 roadster? Need not be new, just functional. Please advise asking price, shipped USPS to ZIP 11050 (New
Offers of posties (right, not twisties) have been pouring in today. I second your observation that the list is truly a wonderful resource. I'm covered for now, but for those of you who were going to
I've been very pleased with the turn-in, and wet and dry stick of the Bridgestone Potenza RE71, though they are hard to find. - Bob Mann, '68 2000 Solex
It all depends on the offset. I run 205x60-14 rears (195x55-14 fronts) on 7" American/Shelby rims with no rubbing at all. (OK, just a bit, and only at full rebound on right handers.) - Bob Mann, '68
Formuling France made a 1600/2000 hub adapter for their wheels, which were fixed to the hub by 9 countersunk cap screws. The Formuling France adapter for the 1600/2000 is p/n 761390. I had tracked th
[This is just an electric fan report for the archives.] During the winter I sourced a used, 14" diameter, 2.05" section ("thinline") SPAL 960 CFM puller fan, intent on replacing a used, 9" SPAL 590 C
Anyone know if the transmission/speedometer cable right angle adapters for the 4-spd and 5-spd are interchangeable? Thx. - Bob Mann, '68 2000 Solex -- R.W. Mann & Company, Inc. >> Airline Industry An
Many don't... (mine either). I'm looking to relieve the kink in the speedo cable. Adapter attaches to the trans so the cable can be routed parallel to the trans tunnel. - Bob