Add the right value resistor and capacitor to a switching 12VDC power supply and you will have a "buffered" 6VDC output. You could also add a diode for reverse current protection, if that was necess
14" SPAL puller mounted directly to the back of the radiator; on rubber isolation mounts, held with (4) thru-core tie-wraps. The SPAL has an integral shroud; no need for stock shroud, though the 14"
Clearance from the nose of the water pump shaft to the rear face of the radiator is approximately 2.5". The SPAL thinline fans are 2.05" thick, overall.
Congratulations, Daniel. Congratulations, Irene. No apologies required. Lotsa roadster content in there. Bachelor party is when and where? Roadster themed, no doubt? - RWM
I suspect he equates magnafluxing of a ferrous part with dye penetrant testing of a non-ferrous part, which is of course, quite different, but still NDT. - Bob Mann, '68 2000 Solex; no dye, no flux
The thermostat/fan controller is essential. Without the controller you either have to remember to switch the fan on and off, or run it constantly. An adjustable thermostat/controller is the ideal se
With respect, if you think Occidental (or Chevron/Texaco, BP, Mobil, you name the big oil) is being a good citizen or even generous here, please let us know. If not, similarly. If you don't have an
I use Stabil over the winter in the Roadster and in power yard tools. Seems to do the job, and it's mostly gone after the first new tank in the spring. - Bob Mann, '68 2000 Solex ( recent: http://ww
Replaced the stock 3-points (35 year-old webbing was UV-rotted) with Simpson Y-harnesses with 5-point cam-lock (single inboard sub strap), manual adjusters, with the single belt end of Y anchored to