- 1. Front end alignment (score: 1)
- Author: "Harvey, Cole E \(US SSA\)" <cole.harvey@baesystems.com>
- Date: Wed, 28 Sep 2005 11:24:29 -0700
- Hi all, My SII is pulling to the right when I apply the brakes. I was chasing after brake problems, but then realized that it could be the alignment. I have replaced some front end parts, but I have
- /html/alpines/2005-09/msg00038.html (7,148 bytes)
- 2. Re: Front end alignment (score: 1)
- Author: JACranwell@aol.com
- Date: Wed, 28 Sep 2005 15:53:32 EDT
- Alignment (toe-in or toe-out) would cause excess tyre wear, but not pulling to one side under braking. Your problem will be, in order of probability, either: 1. Seized front calliper, due to corrosi
- /html/alpines/2005-09/msg00039.html (7,252 bytes)
- 3. Re: Front end alignment (score: 1)
- Author: JACranwell@aol.com
- Date: Thu, 29 Sep 2005 14:31:23 EDT
- Yes, that would usually be the case, as the fluid will not pass as easily through the seized calliper, or brake pipe, as the clean one. Sorry, I should have made that more clear. Julian. Check out t
- /html/alpines/2005-09/msg00041.html (6,669 bytes)
This search system is powered by
Namazu