Hi. I found this nestled amongst the other Classified Ads on the VTR web
site and figured I'd give it a little extra distribution.
PLEASE REPLY DIRECTLY TO Mike <brenner9@yosemite.net>, NOT to me.
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org> *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
============================================================================
Help! I'm trying to change out the roto-flex's and don't quite
understand the process. I've taken the diff and the intermediate drive
shafts out. I've also removed the brake drum and the center nut, and
this is where I'm stumped. It seems to me that I can use a pulley
puller attached to the rear hub and pressing on the outer shaft to
press the drive shaft thru the verticle link, but nothing is budging.
Am I missing someting?
Contact Information:
Name: Mike Brenner
Email: brenner9@yosemite.net
Home Phone: (209)966-4860
Work Phone:
Location: Mariposa, CA
Ad Posted On: 03 Apr 99
|