For some reason, this was sent to me rather than vintage-race@autox.team.net.
Reply to author, not me.
mjb.
----
------- Start of forwarded message -------
From: JLESNOWSKI@aol.com
Date: Sun, 8 Apr 2001 23:36:19 EDT
Subject: Undercoating
I am in the process of removing the crud from the underside of a '64 Alfa
Spider while the engine and transmission are in the shop. Most of the
underside of the area over the drive train is down to bare metal and I need
suggestions for coating material and application techniques. The sheet metal
is in good shape with no rust and should take most metal paints or coatings.
What a mess! I can't believe I started this job. There have been several
postings describing undercoat removal techniques but nothing about what was
applied after removal. Help.
Joe L.
------- End of forwarded message -------
|