Carl,
I have a 1984 Isky catalog. It lists the same grinds as noted by Roger, SB-2
(Part No. 650122), SB-3 (Part No. 650133), and SB-5 (Part No. 650155). Do
you have an Isky Part Number that could be checked?
Clyde
> -----Original Message-----
> From: owner-vintage-race@autox.team.net
> [mailto:owner-vintage-race@autox.team.net]On Behalf Of Roger Sieling
> Sent: Wednesday, July 05, 2000 4:25 PM
> To: carlmcle@saturnnet.com; vintage-race@autox.team.net;
> alpines@autox.team.net
> Subject: Re: CAMS
>
>
> Carl,
>
> I looked in my somewhat older Isky cat (88)and they list three
> grings, SB-2,
> SB-3 & SB-5. Are you certain it is an Isky, not just in an Isky
> box. I may
> have an even older book, but not at iimmediate hand.
>
> Roger
>
>
> >From: "Carl McLelland" <carlmcle@saturnnet.com>
> >Reply-To: "Carl McLelland" <carlmcle@saturnnet.com>
> >To: "Vintage list" <vintage-race@autox.team.net>, "Alpine list"
> ><alpines@autox.team.net>
> >Subject: CAMS
> >Date: Wed, 5 Jul 2000 11:12:31 -0700
> >
> >Hi Again,
> >I need a little technical information that maybe, just maybe, one of you
> >will have archived somewhere. I have a new ISKY cam that I may
> install in
> >my
> >Alpine in the near future, but I don't have any specifications
> for it. You
> >know, unimportant things like: valve adjustment clearance, lift, overlap,
> >duration, things like that. If any of you have the specs for the
> following
> >cam, I would be eternally greatful if you would send them to me.
> >
> >The cam is an ISKY, with grind number HH2
> >
> >The cam is for a series 5 (1725cc) Sunbeam Alpine
> >
> >Thanks guys (and gals),
> > Carl (CSRG #247 series One Sunbeam Alpine)
> > http://carlynneracing.homestead.com/home.html
> >
>
> ________________________________________________________________________
>
|