My suggestion, and what I did when I ran a Midget, is use an Accusump oil
accumulator instead. To me, it's about as good as a dry-sump, and might
also allow you to run less oil in the pan, hence less oil whip, etc.
Also allows dead easy pre-oiling at normal start-up, and after rebuilds.
Brian
At 09:51 AM 10/31/98 -0500, you wrote:
>Anyone have any suggestions re. a proven design of oil pan baffles to use in
>my MGB racer? Someone on the MG-Digest suggested Brown & Gammons as a
>source for one. But, I'm looking for something easy to fabricate & weld
>into a stock pan. I'd like to come up with something as efficient as the
>system in my Alfa Guilietta Veloce.
>
>I thought I saw a mention of a plan for a baffle system in an old issue of
>the MGVR newsletter. But, I haven't been able to find that particular
>reference.
>
>Norm Sippel
>61 Sprint Veloce
>66 MGB
>73 3.0 CS
>
>
Brian Evans
Director, Carrier Sales
UUNET, an MCI WorldCom Company
(416) 216 5111
|