The right way to do this is
>Now then. I've heard that a TR4 gearbox is not suitable for use on a 6 cyl.
>Triumph model like a TR6. Does anybody have any experience with this swap?
Absolutely true! The input shafts are different as are the pilot bearings in the
flywheel. I can't remember the exact differences but I seem to remember that it
is in the length of the pilot bearing portion of the input shaft. I believe that
the 6 is longer giving more support to the shaft. I think that even the splines
are the same so the clutch disks are interchangable. You might be able to use
the input shaft from a 6 in a 4 box but don't quote me on that.
Regards,
Bruce Brandt
bbrandt@tcmail.frco.com
Austin, TX
|