usually you can get next day delivery from amazon for silicon, buna-n,
neoprene sheets in various thicknesses. you could simply cut what was
needed to make a gasket.
1/8"
https://www.amazon.com/s?k=silicone+sheet&crid=21XBT08Y8UTMB&sprefix=silicone+sheet%2Caps%2C70&ref=nb_sb_noss_1
https://www.amazon.com/s?k=neopryne+sheet&crid=1A2CWWZYAE0NM&sprefix=neopryne+sheet%2Caps%2C81&ref=nb_sb_noss_2
<https://www.amazon.com/s?k=silicone+sheet&crid=21XBT08Y8UTMB&sprefix=silicone+sheet%2Caps%2C70&ref=nb_sb_noss_1>
etc
ptegler
On 3/22/2023 11:48 AM, Dave Connitt wrote:
> Hi All,
> Has anyone out there had to replace the gasket in their TR4A gas cap? Mine is
> leaking. I ordered a replacement gasket from the Roadster Factory but itâ??s
> lost in shipment somewhere. I need a replacement sooner than what the US
> Postal Service can provide.
> In other words, I need a Magiver solution!
> Thanks!
> Dave Connitt
>
> Sent from my iPhone
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
--
Paul Tegler
ptegler@verizon.net www.teglerizer.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|