Re: [TR] KROIL

To:	dave northrup <dave@ranteer.com>
Subject:	Re: [TR] KROIL
From:	Hoyt Duff <hoytduff@gmail.com>
Date:	Tue, 24 Jan 2023 11:16:20 -0500
Cc:	Triumphs <triumphs@autox.team.net>
Delivered-to:	mharc@autox.team.net
Delivered-to:	triumphs@autox.team.net
References:	<CANLCLaEqVpDM7MYQ3fQfEd2ht5raNNBfOec3Tij1rpED70mmrw@mail.gmail.com> <7953A045-554D-455A-B9E6-9AD7649E49DD@mac.com> <b73d23bbbf5b41f8ad25cca076c3e399@ranteer.com>

I only use WD40 as a lubricant when cutting aluminum in my lathe. It's
mostly worthless for anything else compared to other chemicals.
** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [TR] KROIL, (continued) Re: [TR] KROIL, bill beecher Re: [TR] KROIL, Bob Re: [TR] KROIL, Rye Livingston Re: [TR] KROIL, Don Hiscock Re: [TR] KROIL, Hoyt Duff Re: [TR] KROIL, Alex & Janet Thomson Re: [TR] KROIL, Greg Lemon Re: [TR] KROIL, dave northrup Re: [TR] KROIL, Paul Tegler Re: [TR] KROIL, Paul Tegler Re: [TR] KROIL, Hoyt Duff <= Re: [TR] KROIL, marty sukey Re: [TR] KROIL, dave northrup Re: [TR] KROIL, Don Hiscock Re: [TR] KROIL, Paul Tegler Re: [TR] KROIL, Rochlin Robert Re: [TR] KROIL, Greg Lemon Re: [TR] KROIL, Jim Henningsen Re: [TR] KROIL, Paul Tegler [TR] Kroil, Ron L"Herault Re: [TR] KROIL, pdqtr6

Previous by Date:	Re: [TR] KROIL, Paul Tegler
Next by Date:	Re: [TR] KROIL, marty sukey
Previous by Thread:	Re: [TR] KROIL, Paul Tegler
Next by Thread:	Re: [TR] KROIL, marty sukey
Indexes:	[Date] [Thread] [Top] [All Lists]