Sujit,
I used a seal from Rimmers on my Stag water pump; no experience with the TR6
seal from TRF. Be advised though that you may have to machine the brass cage
that the seal fits into to accept the seal. I rebuilt mine about 10 years ago,
so maybe the seals are better today, but I had to have the brass cage that the
seal fits into machined a few thousanths to accept the seal. I had bought a
rebuilt pump at the same time and it had just been forced together with no
quality control check and would barely turn due to the same issue; seal wouldnt
fit into the cage, so they just forced it together with a press. Ruined my
timing chain within5,000 miles. Fortunately I caught it, replaced that chain
and I rebuilt my original pump instead. Been fine ever since and no leaks.
Frank
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|