Moss lists those as for TR2 thru TR6. I know they didn't work in my TR3A, at
least not for me.
Bob
-----Original Message-----
From: Art McEwen [mailto:amcewen2@cogeco.ca]
Sent: Monday, April 27, 2020 3:22 PM
To: Kinderlehrer
Cc: triumphs@autox.team.net
Subject: Re: [TR] Tr3a split steering shaft bushing
Hi Bob,
No not the felt one the 2 bearing/bushings that go either side of the split.
Moss part 525-020 vs 525-021
https://mossmotors.com/triumph-tr2-3-4/suspension-steering/steering/steering
-tr2-3b
> On Apr 27, 2020, at 5:56 PM, Kinderlehrer <kinderlehrer@comcast.net>
wrote:
>
> I don't know what you mean by "unimproved" but I was not able to get
> anything other than the felt bush to fit. I did use a piece of a
> leather belt until I could get the felt one from TRF.
> Bob
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of
> Art McEwen
> Sent: Monday, April 27, 2020 2:41 PM
> To: triumphs@autox.team.net
> Subject: [TR] Tr3a split steering shaft bushing
>
> So any trick to inserting them into the shaft? How tightly can I
> squeeze them? My current method is to use a hose clamp like a piston
> ring compressor. I bought the original style "unimproved" ones.
>
> Thanks,
>
> Art.
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.ne
> t
>
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|