triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TR] any TR7 folks put on a clyinder head using ARP bolt kit

from [Q] [Permanent Link][Original]
To: triumphs@autox.team.net
Subject: [TR] any TR7 folks put on a clyinder head using ARP bolt kit
From: Q <HDRider570@att.net>
Date: Fri, 18 Oct 2019 12:23:29 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
User-agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:60.0) Gecko/20100101 Thunderbird/60.9.0 
When I did my Stag I used the recommended TR7 torque which if I recall 
correctly is 85 Footpounds with the supplied lube. Used the supplied 
washers as they are special for the champher under the heads of the bolts.

Edward Hamer

Petaluma CA

** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [TR] any TR7 folks put on a clyinder head using ARP bolt kit, Q <=
Previous by Date:  Re: [TR] [Fot] TR-2/3 Starter Question, Wbeech@flash.net
Next by Date:  [TR] TR3 racing at Sonoma video, DAVE HOGYE
Previous by Thread:  Re: [TR] [Fot] TR-2/3 Starter Question, Randall
Next by Thread:  [TR] TR3 racing at Sonoma video, DAVE HOGYE
Indexes:  [Date] [Thread] [Top] [All Lists]