Hi all,
I've got a question on the exhaust mounting on a Stag.
I'm fitting a new stainless exhaust system from Rimmers and a bracket came with
the mounting kit (158382) which is shown as the mounting bracket for the
downpipes at the end where they attach to the mufflers. On the gearbox, the
upper mounting bracket thst attaches to the tailshaft has a bracket coming off
it that drops down with two holes in it. My old downpipes were attached
directly to this bracket.
So where does this exhaust mounting bracket go and what does it attach to? Its
triangular so to speak and has 3 mounting holes. 2 would attach to the
downpipes presumably, but where does that bracket attach to with the 3rd hole?
The catalog shows a bolt with no nut implying it screws into a nutplate. Does
this bracket attach to one of the holes on the gearbox upper mounting bracket?
Stumped. A picture would help. Mine is a manual gearbox with A type OD, but
it looks like the gearbox upper mounting bracket and this downpipe mounting
bracket are common to all except the type 65 box.
Any help appreciated.
Thanks,
Frank
'72 Stag
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|