I second the angle grinder. I have a nice Dewalt that has held up to
significant abuse. If I only needed to cut the occasional bolt, I would
not hesitate to get the grinder Randall mentions below. It will be
$9.99 during their black Friday sale if the leaked ad is correct.
I second the other reply about the grinder with wire wheels. They are
great at removing paint and bondo. I used a cupped wire wheel inside my
TR6 engine compartment when I had the engine out and it quickly and
easily got down to bare metal. This setup is far superior in most cases
to a wire wheel in a drill.
Brian
On 11/12/2018 2:43 PM, Randall wrote:
>> Anyone have a preferred tool for cutting off rusty bolts?
> I don't know anything about the Dynabrade; but it looks like a nice tool.
>
> Still, at less than 1/10 the price (and even less than that on sale), I
> think I'll keep using my HF angle grinder for old rusty bolts. Equipped
> with a cheap HF cutoff blade, it slices through steel like the proverbial
> hot knife.
>
> https://www.harborfreight.com/4-12-in-43-amp-angle-grinder-60625.html
>
> Although shown with a handle and guard, both come off easily for better
> access in tight spots. I also save old, almost-worn-out cutoff blades to
> get into tight areas.
>
> It's only downside (if you can call it that) is that it doesn't know the
> difference between the bolt you want to cut, and that priceless casting
> right next to it. Just touching it to the wrong surface will leave a divot.
>
> -- Randall
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/bk13@earthlink.net
>
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|