triumphs
[Top] [All Lists]

[Fot] 89MM piston question

Subject: [Fot] 89MM piston question
From: van.mulders.marcel at telenet.be (van.mulders.marcel at telenet.be)
Date: Fri, 31 Aug 2018 19:43:07 +0200 (CEST)
References: <CABFvdWvc7c8O4vBj6GELL9MEH42PQjaaFoW_RXgQsDhoL0rg7g@mail.gmail.com>
Bob, 
It is definitely necessary to make that modification to the liners. The relieve 
should correspond to the shape of the combustion chambers : about 4 mm wide on 
a 89mm engine. 
Marcel 


Van: "fot" <fot at autox.team.net> 
Cc: "fot" <fot at autox.team.net> 
Verzonden: Donderdag 30 augustus 2018 00:05:43 
Onderwerp: [Fot] 89MM piston question 

Do the guys running the 89MM pistons and liners need to relieve the liners to 
clear the intake valve, or does the extra MM make the difference? 

Bob Kramer 

On Tue, 

_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Archive: http://www.team.net/pipermail/fot 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180831/7a11dd8d/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>