triumphs
[Top] [All Lists]

[Fot] topic change up - venting

Subject: [Fot] topic change up - venting
From: robertlangtr6 at yahoo.com (Robert Lang)
Date: Tue, 13 Mar 2018 13:52:09 +0000 (UTC)
References: <405606283.77566.1520896448842.ref@mail.yahoo.com> <405606283.77566.1520896448842@mail.yahoo.com> <3CA2B60C-4FFA-4224-9BEB-98DA04E8D00C@me.com>
Hi Brian,
Two things - I'd def replace the sealing block with the steel piece. You will 
never have that problem again. second, a PCV valve will work. I run one on my 
TR6. I just got a a generic PCV valve with 1/2 barbs and route it to the intake 
manifold. Note, however that you need to be careful how you place the vent(s) 
in the valve cover so that you don't suck oil from the valve cover area... note 
that the stock valve cover has a way to block sloshed oil from pushing out the 
tube. You only want to vent the mist (and subsequent in-sump pressure) not the 
oil itself.
You can also get a oil separator setup in there, Goodparts makes a really nice 
one. I have one in my PCV system. No leaks!!!
c ya,Bob Lang
 

    On Tuesday, March 13, 2018, 12:15:29 AM EDT, Scott Janzen via Fot <fot at 
autox.team.net> wrote:  
 
 I didn?t say I wanted to race it, but since the club I race with, Vintage 
Racer Group, just decided cars up through 1989 are vintage and eligible (yeesh, 
frown), it should fit right in!
Brian, I would say venting might help, but only if it?s a small leak. ?If 
you?ve got a anything more than a drop or two when the the car is stationary 
and running, you?re going to have more when you?re braking, the oil sloshes up 
there ?and it?s hot and at higher revs.
On Mar 12, 2018, at 7:14 PM, Brian Schirano via Fot <fot at autox.team.net> 
wrote:
Hi Friends
Sorry about stirring the pot on vintage over Scott's post on the TR4 on BAT, 
pretty nice car though I thought, competing in my dreams for the Volvo 544 with 
the V8
Anywise - thinking about the oil leak coming from the front of the pan on the 
GT and the high probability it's the sealing block.? That said, it seems that 
if I alleviate the air pressure build up in the engine I might minimize it 
until I actually have another reason to pull the engine.
Has anyone ever put a PCV on the vent coming off the valve cover and hooked it 
to the intake manifold? worked in the old days.
Any thoughts and comments are welcome.
ThanksBrian
26A GT6+, 28 TR6Brian Schirano
585-305-0349 Cell?
BSchirano at yahoo.com_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive



_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180313/35c6ad9a/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>