--===============2452668691213868426==
Content-Language: en-US
boundary="_000_BLUPR19MB014877AC68C950040A2A2AB9ECB70BLUPR19MB0148namp_"
--_000_BLUPR19MB014877AC68C950040A2A2AB9ECB70BLUPR19MB0148namp_
Content-Transfer-Encoding: quoted-printable
Good point. I pulled the carbs for about the 4th time today to check the f=
loat levels. On previous rebuilds, I found that making the mold lines para=
llel to the bottom edge would make the lowest point between 16 & 17 mm. Wha=
t I learned today is that everything on the lower level of the floats can b=
e adjusted to be between 16 & 17 mm. When all of the bottom surface is betw=
een 15 & 16, the mold line isn't parallel any more. Thanks Peter!
________________________________
From: Triumphs <triumphs-bounces@autox.team.net> on behalf of Pete Arakelia=
n <arakelianp@mossmotors.com>
Sent: Wednesday, March 9, 2016 1:34:47 PM
To: 'triumphs@autox.team.net'
Subject: [TR] TR6 Stromberg question
< I adjusted the new float to fully cl ose the valve when the mold line o=
f the float was parallel with the horizontal edge of the carb where the fue=
l reservoir attaches.
What? The correct float adjustment is 16-17mm between the gasket face on t=
he carb body to the highest point of each float with the carb inverted.
Peter
--_000_BLUPR19MB014877AC68C950040A2A2AB9ECB70BLUPR19MB0148namp_
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Exchange Server">
<!-- converted from rtf --><style><!-- .EmailQuote { margin-left: 1pt; padd=
ing-left: 4pt; border-left: #800000 2px solid; } --></style>
</head>
<body>
Good point. I pulled the carbs for about the 4th time today to check =
the float levels. On previous rebuilds, I found that making the mold =
lines parallel to the bottom edge would make the lowest point between 16 &a=
mp; 17 mm. What I learned today is that everything
on the lower level of the floats can be adjusted to be between 16 & 17=
mm. When all of the bottom surface is between 15 & 16, the mold line i=
sn't parallel any more. Thanks Peter!
<br>
<hr style=3D"display:inline-block;width:98%" tabindex=3D"-1">
<div id=3D"divRplyFwdMsg" dir=3D"ltr"><font face=3D"Calibri, sans-serif" st=
yle=3D"font-size:11pt" color=3D"#000000"><b>From:</b> Triumphs <triumphs=
-bounces@autox.team.net> on behalf of Pete Arakelian <arakelianp@moss=
motors.com><br>
<b>Sent:</b> Wednesday, March 9, 2016 1:34:47 PM<br>
<b>To:</b> 'triumphs@autox.team.net'<br>
<b>Subject:</b> [TR] TR6 Stromberg question</font>
<div> </div>
</div>
<div><font face=3D"Candara" size=3D"3"><span style=3D"font-size:12pt;">
<div><font color=3D"blue"><<font face=3D"Calibri" size=3D"2" color=3D"bl=
ack"><span style=3D"font-size:11pt;"> I adjusted the new float to fully cl&=
nbsp; ose the valve when the mold line of the float was parallel with=
the horizontal edge of the carb where the fuel reservoir
attaches.</span></font></font></div>
<div><font face=3D"Calibri" size=3D"2"><span style=3D"font-size:11pt;">&nbs=
p;</span></font></div>
<div><font face=3D"Calibri" size=3D"2"><span style=3D"font-size:11pt;">What=
? The correct float adjustment is 16-17mm between the gasket face on =
the carb body to the highest point of each float with the carb inverted.</s=
pan></font></div>
<div><font face=3D"Calibri" size=3D"2"><span style=3D"font-size:11pt;">Pete=
r</span></font></div>
<div><font face=3D"Calibri" size=3D"2"><span style=3D"font-size:11pt;">&nbs=
p;</span></font></div>
</span></font></div>
</body>
</html>
--_000_BLUPR19MB014877AC68C950040A2A2AB9ECB70BLUPR19MB0148namp_--
--===============2452668691213868426==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
--===============2452668691213868426==--
|