If the TR6 is like the TR4A, then they go under the bolt heads (after the metal
washer). I think the idea is to seal out the water from the inside the wheel
well.
-Darrell
> On Jan 15, 2016, at 4:20 PM, D&BLambert <dblambert@cox.net> wrote:
>
> I'm (finally) in a position to remount the rear fenders on my'71 TR6
> project. I purchased the mounting kits from TRF and they look good and very
> complete. The kits come with about 20 fiber/cardboard "sealing washers"
> about 1/16" thick. I don't remember taking any off when I dissembled the
> car about 5 years ago. Where do the sealing washers go? Between the
> fenders and the body shell seems to be the logical place, but like I say,
> there weren't any that came off.
> Thanks, Dennis
> <RFK134.JPG>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|