If I can't get the pins to work, I'll try the hanger idea. Thanks.
Joe B
72 TR6
> On Nov 8, 2015, at 17:57, Stan Foster <stan@redtr6.com> wrote:
>
> Numerous options after you have compressed the gubbins to expose the spindle
> and hole including surgical locking forceps to hold the pin secure while you
> insert it or use coat hanger wire, sawn through about half inch from the end,
> insert it and then bend to break off the end remaining in the handle spindle.
>
> Stan
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Joe
> Burlein
> Sent: Sunday, November 8, 2015 4:27 PM
> To: Triumphs <triumphs@autox.team.net>
> Subject: [TR] TR6 door pins
>
> Ok, it has been years since I've had the door panels off my car. I just got
> done doing some work on them and I can't get the stupid handles on! What is
> the trick?!? HELP!
>
> Joe B
> 72 TR6
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/stan@redtr6.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|