triumphs
[Top] [All Lists]

Re: [TR] Clutch Fork Taper Pin

To: Randall <TR3driver@ca.rr.com>
Subject: Re: [TR] Clutch Fork Taper Pin
From: terryrs@comcast.net
Date: Fri, 23 Oct 2015 21:35:28 +0000 (UTC)
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <87.9F.11609.63038265@cdptpa-oedge03>
Thread-index: AdEMRz0yubIutksdQJmO3VQVTYfMF7wa7VaAvBq4LgCc5LQqEw== s=q20140121; t=1445636129; bh=kssB0kTzx6KKtkfiDkCbcp/0CvqnDlHYS30traC2NeE=; h=Received:Received:Date:From:To:Message-ID:Subject:MIME-Version: Content-Type; b=wQP9pjCtdNTn2c+gCpkz0F7sEI+VQ6iOYVh7NlZksJ1u34D2abMMWEUwh9JT29AHg V+hWbDxGJiqyziBB1NH8D50+7wJOXbp4XXxu724AEfueVToBP/R2vt11x7zjqMZedl 8O4ndZsMVnaogfd190LPTD4S0LVxk6Z/7U2T55PIEjwVPGvA0UpQQARwN4R8Z+z7dv F1xPYX1CH5VvL/U341s2YccRVnU4tSe3e3xdkT3usi0oUs8TYaeukzwO2RTopZS2ta okt3Dlxy90hvEtTerY3n1m9saYbIcr6hVAhQj95A4W7O44wwgOEsXnDCK4Qtm7cqPj D2pP1zevPJ3EA==
Thread-topic: Clutch Fork Taper Pin
Thank you, Randall, I did.  In fact, it took a bit but I finally remembered to 
check the adjustment at the master cylinder which was waaaaay off.  Went from 
severe slip to nearly nought.  

----- Original Message -----
From: "Randall" <TR3driver@ca.rr.com>
Cc: triumphs@autox.team.net
Sent: Wednesday, October 21, 2015 8:39:19 PM
Subject: Re: [TR] Clutch Fork Taper Pin


> Thank you, everyone.  It's mild slippage that only happens 
> when I drop to third to pass, then shift to fourth at high 
> rpm.  

Did you check the clutch adjustment?  My experience is that the stock TR3 
clutch doesn't wear very fast, but when it does, it closes
up the free play at the slave cylinder.  Once the freeplay is gone, the clutch 
cannot engage fully.

Randall


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>