You "just" need more leverage. Those seem much easier to tighten
than to loosen. If you can slip a piece of tubing over the wrench to
make it longer, that might do the trick. Or if you have a crescent
wrench that's longer than the square end wrench, that may work to get
it to move. Of course, make sure you're really turning in the
"loosen" direction or it makes things worse. :)
BTDT - good luck!
Tony Drews
At 11:46 AM 9/5/2014, Jeffrey Gayton wrote:
>Greetings. Please forgive the newbie mechanical question, but Im having a
>devil of a time removing the gearbox filler plug on my TR4. I just cant get
>enough purchase with my square wrench. Every time I try to turn it, it slips
>off. Please dont tell me I have to remove go in from the top!
>
>Thanks.
>
>-- Jeff
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|