Hello List:
I am installing lap belts in my TR2 and have checked the archives for
some background with no real clear answers. I intend to anchor the
inside belt to the part of the trans/drive shaft tunnel that is welded
to the floor. This puts the anchor bolt in "shear" position, which I
have been told is OK. Just not clear on where to put the anchor for the
outside belt. Thought of the wheel-well as the metal appears to be quite
solid. Not sure of the sloping shelf panels behind the seats as they
appear to be boxed sections & access may not work.
Any advice on mounting location? Using high strength reinforcing washers
and Grade 8 hardware.
Thanks for any help with this one.
Angelo Graham
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|